Specifications

• 2024 Factory Cat Micro-HD v2 Base
• Year2024
• ManufacturerFactory Cat
• Model NameMicro-HD v2
• Trim NameBase
• Generic Type (Primary)General
• Motor
• Motor PowerDisk: 20" (1x) 0.75 hp/ 200 rpm | 26" - (2x 0.75 hp/ 270 rP.m)
• Drivetrain
• Drive SystemPower: 0.75hp - All Gear / Sealed (559 watts) & Pad Assist
• Wheels & Tires
• Rear Wheel(2×) 2.5'' × 1.38'' ([2×] 6 × 4 cm) - Non-Marking Grey
• WheelsFront Casters: (2×) 8'' × 2'' ([2×] 20 × 5 cm) - Solid Black
• BatteryStandard: 85 ah WET
• Charging System120VAC / 60 Hz Input - 24VDC / 8 amp Output
• Electric
• ElectricalSystem: 24 VDC
• Operational
• Operating SpeedDisk Brush Speed: 200 rpm | Forward: 0 - 230 ft/min / 2.6 mph (0 - 70 m/min / 4 km/h) | Scrubbing: 0 - 184 ft/min / 2 mph (0 - 56 m/min / 3 km/h) | Reverse: 0 - 130 ft/min / 1.5 mph (0 - 40 m/min / 2 km/h) | Vacuum Power: 0.8 hp / 3 Stage (640 watts)
• Run Time Per TankfulBattery Run Time: Up to 2.5 Hours
• Operating ConditionsProductivity - Theoretical: Up to 15,748 sqft (1,463 sqm) | Productivity - Practical: Up to 7,308 sqft (679 sqm)
• Hydraulics
• AirflowVacuum (Water Lift / Airflow): 70'' / 70 cfm (178 cm / 2 cm/m)
• Maximum PressureBrush Down: Up to 100 lbs (45 kg)
• Hydraulic FlowSolution Flow / Filter: 0 - 0.5 GPM / Stainless Inline (0 - 2 LPM)
• Performance
• Noise LevelDecibels: 72 dB
• DimensionsDisk: 20" - (1 x) 20", Includes Jaws with Rollers for Wall Protection: 26" - (2x) 13"
• Cutting Width17'' & 20'' - Disk (43 & 51 cm)
• Length50"
• Width22.5"
• Height41.25"
• Capacities
• VolumeDrain Saver: 30 cubic inches (492 cubic cm)
• FeaturesSolution Tank Capacity: 10 Gallons (38 liters) - w/ Graduated Site Tube | Recovery Tank Capacity: 10 Gallons (38 liters) - 1.5'' diameter Drain Hose |Squeegee: 17D - 26'' Curved w/ 2-sided Rear Blade 20D - 30'' Curved w/ 2-sided Rear Blade | Demisting Chamber: 1.25 Gallons (5 liters)
• Weights
• Weight(w/o Batteries): 278 - 328 lb | (w/ 85 ah Batteries): 41 0 - 460 lbs | Actuator Rating: 500 lbs (227 kg)